Contact us

Sales: Lili Su (Ms.)
Tel: +86-020-62199556
Fax: +86-020-62199550
Mobile: (86)13802922567
QQ: 2850757785


New product---ETCR6000 AC/DC Clamp Leaker

ETCR6000 AC/DC Clamp Leaker
New product---ETCR6000 AC/DC Clamp Leaker
ETCR6000 AC/DC Clamp Leaker is specially designed for measurement of AC/DC current; by adopting up-to-date CT technology and digital integration technology. The small clamp is suitable for line densely places (electric power measurement system, the high speed rail system, car circuit overhaul, and so on), non-contact measurement, to ensure safe operation. It is a product with relatively small size, high accuracy and perfect function compared with similar leakers in the world. The leaker could be widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments. it is an essential tool for electrician safety testing.
ETCR6000 AC/DC Clamp Leaker also named: DC Leakage Current Clamp Meter, Car DC Leakage Current Clamp Meter, AC/DC Clamp Leakage Current Tester. It has those functions as data holding and data storage. It obtains one RS232 interface, communication cable and software, through which historical data inquiry is available, for reading, saving and printing.

Measurement of AC/DC current, leakage current
Power Supply
Zn-Mn dry battery,6F22,9V
Test Mode
Clip-on CT, integral mode
Clamp Size
Measurement Range
0Ma-60.0A AC/DC
±2%rdg±5dgt (23℃±5℃, below 75%rh)
Display Mode
Four digits LCD display
LWH: 168mm×65mm×34mm
LCD Dimension
35mm×21.5mm; display domain: 32mm×15mm
Sampling Rate
2 times/s
AC: 45Hz-400Hz
Polarity Indication
DC current auto identified and display“
Test Position
Tested wire in the jaw center
Range Shift
Line Voltage
RS232 Interface
Data stored in the memory of the meter via RS232 upload to PC
Baud rate:9600, data bit:8, stop bit:1
Data Memory
99units, FULL blinks when the memory is full
Reading Hold
DH indicating the reading is hold
Out of Range
OL indicating the current is out of range
Auto Power-off
5 Minutes after power on, it will power off automatically to lower the power consumption
Battery Voltage
Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed
180g (including the battery)
Working Current
Working Temperature and Humidity
-10℃-50℃,below 80%rh
Limit Temperature Error
-10℃-0℃ and 40℃-50℃, within 2%rdg
Storage Temperature and Humidity
-10℃-60℃,below 70%rh
Insulating Strength
AC2kV/rms (between the alloy of the clamp and the housing)
Applicable safety rules
IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Copyright@ 2003-2020  Guangzhou ETCR Electronic Technology Co., Ltd..  All rights reserved.     

ETCR Electronic Technology Company

Add: No.8, Yongxing He Xingdong Street, Taihe Town,Baiyun District,Guangzhou,China. Tel: +86-020-62199556     Fax: +86-020-61100822   E-mail: